Wet Cleaning: Also known as hot water extraction or steam cleaning, the carpet is first pre-conditioned with a chemical reagent that liquefies soils and oil-based substances which may be present in the carpet fibers. Water is heated to a temperature near its boiling point and pressurized, then injected into the carpet. After about 10 to 15 minutes, the solution is extracted with a vacuum.
Bonnet Cleaning: This carpet care service is most often used for routine light maintenance. It can also be used for regular carpet cleaning. The carpet is first vacuumed, and then a chemical solution is sprayed on to it with a hand pump or electric sprayer. The solution is allowed to stay on the carpet for a suitable dwell or reaction time. The absorbent pad or bonnet, which looks like a towel, is placed on the drive block of a rotary floor machine and spun over the carpet surface at 100 to 300 rpm. This action serves to impregnate the carpet fibers with the chemical solution and then pick it up with the soils afterward.
Carpet Absorbent Dry cleaning: A powder that has been mixed with special solvents and cleaning agents is spread over the carpet, and then worked into the carpet fibers with a machine fitted with counter-rotating brushes. The powder absorbs soils in the carpet fibers. After it’s allowed to set on the carpet for 10 to 15 minutes, it’s vacuumed up.
Dry foam: A cleaning agent is applied to the carpet to help suspend dirt and debris in the carpet, which is then whipped into foam and worked into the carpet fibers with the rotating brushes of a special machine. After a short dwell time, the foam is extracted with a vacuum.